Choose curtains by what the room needs before choosing the color. Decide how much daylight to keep, how private the room must be after dark, whether the panels will move every day, and what cleaning routine is realistic. Then select the fabric and lining, a compatible heading, and the finished size.
The result should be a short, usable specification, not a list of attractive fabrics that solve different problems. A curtain can look right in a photograph and still be wrong for your window's light, operation, or upkeep.
Choose the job before the fabric
Write down one non-negotiable requirement and two preferences. For example: "Privacy after dark is essential; I prefer a soft daytime glow and a relaxed texture." That immediately rules out treating an untested sheer as the only privacy layer.
Decide whether the curtains are functional or decorative. Functional panels need to cover the intended opening and move freely. Decorative side panels can remain stationary, but another treatment must provide any required privacy or darkness. Do not order narrow decorative panels expecting them to become full-coverage curtains later.

Crate & Barrel's curtain guide compares fabrics, room uses, and hardware. Use those categories as a shortlist, then check the actual product: a fiber name alone does not establish its opacity, care method, or finished drape.
Build a room-by-room shortlist
The following are planning examples, not universal product prescriptions. Use the row that matches the room's behavior rather than its name alone.
| Room situation | Start by comparing | Check before buying |
|---|---|---|
| Living room facing neighbors | A filtering daytime layer with a separate opaque option if needed | Views from outside with your evening lights on |
| Bedroom affected by a streetlight | An opaque or blackout construction with sufficient edge coverage | Top, side, and center gaps, not only the swatch |
| Home office with screen glare | Adjustable light filtering or layered coverage | Whether you can soften light without losing useful daylight |
| Living room with existing privacy shades | Decorative panels or a lighter operable curtain | Clearance between the curtain and the shade |
| Kitchen or damp bathroom | A treatment suited to moisture, splashes, and safe placement | Care instructions and clearance from cooking and heating appliances |
A street-facing living room and a sheltered upstairs sitting room may need very different privacy plans even if their windows are the same size. IKEA's U.S. light-filtering category describes these curtains as admitting some daylight with enhanced privacy; do not translate that into a guarantee that every filtering fabric is opaque at night.

In homes where young children live or visit, review the operating system as well as the fabric. The U.S. Consumer Product Safety Commission recommends cordless window coverings. Keep furniture placement and accessible cords in the safety discussion; a decorative appearance does not remove an operating-cord hazard.
Compare fabric, lining, and heading together
Evaluate the finished construction
Look at the face fabric and any lining as one assembly. The face gives the room its color and texture; an added lining can change its opacity, weight, and how the folds sit. Ask for the actual fiber composition and care instructions rather than inferring them from terms such as "linen-look" or "performance."
Handle a sample, fold it, and hold it against the window. A small swatch helps compare color and transparency, but it cannot show the full weight, stack size, or finished hem of a large panel. Check return and alteration terms before relying on a sample for a custom order.
Choose a heading for daily use
A pocket slides fabric directly over the rod; a ring or hook system changes the contact between panel and hardware. For panels you will move every day, test the proposed mechanism rather than choosing solely from a close-up photo. A track needs its compatible carriers and heading; a wave-style look is not produced by any generic rod.
Keep the hardware decision on the same order sheet as the curtain. A change from a pocket to clip rings can change the hanging position even when the listed panel length stays the same.

Make care a buying condition
Read the care instructions for the complete panel, including lining and trim. Do not assume that every cotton or linen curtain can go in a washing machine. Consider whether you can remove, clean, dry, and rehang a large panel with the equipment and space available.
Choose a color that works in your actual light
Start with three possibilities rather than twenty: a near-wall neutral, a quieter version of a color already in the room, and a contrasting option. Place each sample beside the wall, floor, and largest upholstered item. Then hold it vertically at the window, both backed by the proposed lining and exposed to light.

Use this small comparison sheet to make the decision concrete:
| Observation | Sample A | Sample B |
|---|---|---|
| Looks compatible beside wall and flooring | Record what clashes or connects | Record what clashes or connects |
| Works in daytime and evening lighting | Note both conditions | Note both conditions |
| Transparency suits the privacy plan | Check the actual assembly | Check the actual assembly |
| Texture and pattern work at a larger scale | Request a larger sample if needed | Request a larger sample if needed |
| Care and hardware are practical | Record requirements | Record requirements |
The sheet is a decision aid, not a performance test. Pottery Barn's living-room guide also distinguishes function from color, fabric, and pattern choices. There is no requirement to match the wall or sofa exactly. A repeated undertone can connect the room without making every surface identical.
Check the complete order, not just the panel price
Before checkout, record the number of panels, width measurement method, length, heading, lining, color, hardware, and care requirements. Confirm whether the price is for one panel or a pair, and whether a pleated width means finished coverage rather than fabric laid flat.
Include any needed rings, brackets, installation, and alterations in your comparison. A less expensive panel that needs additional lining and hemming may not be the simpler purchase.
Use our curtain measuring guide to turn the shortlisted treatment into actual width and length. Keep detailed measuring separate from the style decision so a last-minute color change does not accidentally change your sizing assumptions.
Curtain selection questions
Should every room use the same curtain color?
No. A consistent heading or hardware finish can connect rooms while their fabrics serve different needs. Within one open-plan view, compare the treatments together before mixing strongly contrasting colors or hem positions.
Should I buy ready-made or custom curtains?
Start with fit and the order specification. Ready-made panels can work when their sizes, lining, and headings meet your needs. Custom construction becomes useful when you need a particular finished size or combination. Compare the full installed cost and return terms rather than assuming one option is always better.
Can white curtains provide privacy or darkness?
They can, depending on their construction and lining. White is a color, not an opacity rating. Check the product's light-control information and test a representative sample under the conditions that matter to you.
Editorial guidance reviewed November 13, 2026. Examples are planning aids, not product specifications. Follow the instructions for the curtain and hardware you choose.