Light-filtering curtains soften daylight; blackout curtains are designed to stop light through the fabric. Room-darkening curtains sit between those goals, reducing light without necessarily making the material fully opaque. The important second question is how the finished treatment fits: even an opaque panel can leave bright gaps around its edges.
Choose for the light and privacy you need at particular times of day. Do not judge performance from a dark fabric color, a thick-looking photograph, or the word "lining" alone.
Compare what the fabric does, not just its name
| Curtain type | Main purpose | What it does not establish by itself |
|---|---|---|
| Sheer | Soften the view and add a light decorative layer | Reliable nighttime privacy or a dark room |
| Light-filtering | Admit softened daylight with more screening than an open sheer | The same opacity across every fabric, or complete nighttime privacy |
| Room-darkening | Reduce incoming light for a dimmer room | Complete blockage through the fabric |
| Blackout | Use an opaque construction or lining to block light through the material | A gap-free installation or total darkness throughout the room |
These are shopping categories, not a shared numerical scale used consistently by every seller. Quince's comparison separates four light-control options and explains the role of lining in its own products. A composition listed there applies to those products, not to all curtains with the same category name.
Likewise, IKEA's U.S. room-darkening range is distinct from its blackout category. Compare the specific construction and description of the panel you intend to order. Do not assign an unsupported light-blocking percentage to a category.
Separate daytime light from nighttime privacy
There are two decisions: how the room feels from inside and what someone can see from outside. A fabric that looks reassuring in bright daylight may reveal more when the room lights are on after dark.

Light-filtering curtains from IKEA are described as blocking some sunlight while preserving daylight. That makes filtering a useful starting point for a bright living area, but it is not a substitute for checking your actual nighttime view. Weave, color, folds, indoor lighting, and viewing angle all matter.
For a street-facing room, inspect the view from a safe, permitted outside position with the usual evening lamps on and the treatment fully closed. Check the center and side edges as well as the fabric. A sample held against part of the window can identify obvious transparency, but it does not reproduce the completed installation.
When daylight and nighttime coverage are both important, consider independently operable layers. The daytime layer can remain closed while the more opaque layer is open. Confirm that the two systems have enough clearance to work without catching; adding fabric without planning the hardware can create a new problem.
Diagnose where unwanted light enters
Before replacing a curtain, identify the route the light is taking. Otherwise, you may buy a denser fabric while leaving the actual problem unchanged.
| What you see | Likely issue to investigate | What to check next |
|---|---|---|
| A glow across the fabric surface | Fabric or lining is transmitting light | Compare the specified opacity and the actual panel construction |
| Bright strips at the sides | Perimeter coverage or projection | Extension beyond the opening and a compatible return arrangement |
| A bright line between panels | Insufficient overlap or incomplete closure | Available coverage, heading arrangement, and blocked travel |
| Light above the curtain | Top opening between treatment and wall | The mounting arrangement or a properly planned additional layer |
| Light under the hem | Bottom clearance or an uneven floor | The desired finish; do not create a trip or heat-clearance problem |
These observations are a troubleshooting sequence, not a guarantee that one accessory will create total darkness. A wraparound arrangement may address a side gap but cannot turn a transmitting fabric into blackout material. A denser lining cannot close a gap between two panels.
For panel coverage calculations, see our curtain width and fullness measurements. Allow for the maker's definition of flat width versus finished pleated coverage.
Test samples without treating them as lab results
Compare samples at the actual window, at the time when the unwanted light is strongest. Use the proposed lining behind the face fabric, not a different backing that happens to be available. View the samples from both sides if privacy is part of the decision.

Keep the comparison fair: place samples side by side under the same conditions. A phone photograph can help you remember their appearance, but automatic exposure changes mean it is not a dependable way to measure light transmission. A small swatch also cannot demonstrate edge gaps, full-panel weight, or stack-back space.
Record four separate outcomes: daytime brightness, nighttime visibility, fabric appearance, and care requirements. Ask the seller about documented product-specific performance when a percentage or certification is important. A blackout label does not, by itself, prove a thermal rating, an energy-saving percentage, or soundproofing.
Choose by the time of day that matters
A bright living room used mainly during the day: start with filtering samples and test the evening privacy requirement separately. If another blind already provides privacy, the curtain does not need to do every job.

A bedroom affected by morning sun or an outdoor light: evaluate blackout construction and the entire perimeter. Decide which gaps are acceptable before choosing mounting hardware. A dark face fabric is not a replacement for an opaque construction.
A room used for both daytime work and occasional screen viewing: compare two independently operable layers against a single opaque treatment that would need to stay open for daylight. The better option is the one whose daily operation you will actually use.
These examples are editorial planning scenarios, not tests of a particular LALALL product. Product specifications and the actual window determine the final choice.
Light-control questions
Are room-darkening and blackout curtains the same?
Not necessarily. A room-darkening panel can reduce light while still transmitting some through the material. Check the individual product rather than treating the two terms as interchangeable.
Can I add blackout lining to curtains I already own?
Sometimes, but check the attachment method, dimensions, cleaning compatibility, and extra load on the hardware. Adding a liner does not automatically solve side or top gaps, and not every heading accepts a separate liner.
Do blackout curtains have to be dark-colored?
No. The visible color and the light-blocking construction are different choices. Evaluate the lining or fabric specification and its installation, rather than assuming a dark color performs better.
Editorial guidance reviewed November 13, 2026. Examples are planning aids, not product specifications. Follow the instructions for the curtain and hardware you choose.