To make curtains, measure the finished coverage and drop, calculate fabric for fullness and hems, cut matching panels, finish the sides and bottom, construct the heading, then hang the panels before making the final length check. The exact allowances depend on the heading, fabric width, pattern repeat, and whether you add lining. Do not cut all the fabric until those choices are settled.
This tutorial focuses on a straightforward pair of sewn panels. Pleated or lined drapery takes extra planning; use the same sequence but follow the relevant heading and lining instructions.
Plan the finished panel before cutting
Write down the usable rod or track width, desired fullness, finished drop, number of panels, heading style, and whether you need lining. Measure from the actual hanging point to the intended hem. Our curtain measuring guide explains how to separate usable hardware width from the window opening.
Check the fabric bolt width and pattern repeat. A large repeat may require extra fabric so motifs line up across the pair. Also check the fabric's care and preparation instructions before prewashing or pressing; not every decorative textile should be treated the same way.
Calculate fabric width and yardage
For a simple gathered panel, start with the usable rod or track width and choose a fullness target appropriate to the fabric and heading. For example, if the usable span is 72 inches and you choose 2× fullness, the combined flat fabric width is about 144 inches before side hems, seams, and any pattern matching. For two equal panels, that is about 72 inches of flat fabric per panel before allowances.

| Planning item | Example | What it excludes |
|---|---|---|
| Usable track span | 72 in. | Decorative finials or unusable returns |
| Chosen fullness | 2× | Heading-specific gathering rules |
| Combined flat width | 144 in. | Side hems, joining seams, pattern repeat |
| Two equal panels | 72 in. each | Extra fabric allowances for construction |
This is a worked planning example, not a universal yardage recipe. A rod-pocket panel, a pleated heading, and a wave-style track do not use fabric in the same way. HGTV's lined drapery tutorial illustrates how lining, header construction, and pleats add separate material and steps. Its yardage example is specific to its project, not a rule for every window.
For a simple rod-pocket or tape heading, calculate the vertical cut length by adding the maker's or pattern's top-heading and bottom-hem allowances to the finished hanging drop. Record each allowance separately so you can revise the heading without losing track of the hem.
Cut panels and match any pattern
Lay fabric on a large, clean, flat surface. Check the grain and the direction of the design before cutting. Measure both panels from the same reference edge and use a long straightedge to mark square lines. If the fabric has a one-way print, keep both panels facing the intended direction.
When a pattern must match across the pair, align the repeat before cutting the second panel. This can use more fabric than the width calculation alone suggests. Keep a note of the repeat and panel orientation in case you need to recut or add a joining width later.

Hobby Lobby's simple curtain-panel project sheet shows a basic measuring and cutting sequence. Treat its stated allowances as instructions for that particular rod-pocket project, not as a universal substitute for your own heading plan.
Finish the side and bottom hems
Press folds before stitching and test the stitch on a fabric offcut. Finish raw edges in a way suitable for the fabric. Use a consistent side-hem width on both panels; uneven side folds can change the visible width and make the pair look mismatched.
For the bottom hem, leave enough fabric for the chosen finish and any lining relationship. Do not assume a deep hem will suit a sheer or lightweight cloth: excess bulk can show through or make the bottom hang differently. If you add weights, use only a construction and weight appropriate to the fabric and heading.
The University of California Agriculture and Natural Resources curtain-sewing handout provides an example of a measured hem workflow. Its allowances are for the handout's construction method; adapt only after checking your fabric and desired finished size.
Make a heading that fits your hardware
Choose the top construction before sewing. A rod pocket needs a channel sized for the rod and enough room for the fabric to slide. Heading tape needs to be compatible with its hooks and the fullness you want. Tabs or back tabs need evenly spaced loops with seams strong enough for the panel weight. Pleated headings need the correct tape or sewn pleats and compatible pins, rings, or gliders.
Do not sew a generic heading and assume it will work on any track. The attachment method affects how the panel hangs and where its finished length begins. Our pinch-pleat construction guide explains the difference between flat fabric width and finished pleated coverage.
Hang first, then finish the final drop
Install the compatible rod or track according to its instructions. Hang both panels and allow the fabric to settle in the way its maker recommends. Check the drop at several points because the floor may not be level. Only then mark the final hem line, keeping the chosen float, floor-kiss, or puddle finish consistent with the room.

Before cutting the final hem, pin or baste it and view the panels open and closed. Check that the lining does not show below the face fabric and that both panels meet as intended. If you later need to shorten ready-made panels instead of making new ones, use our curtain hemming guide.
Curtain-making questions
How much fabric do I need to make curtains?
Start with the usable rod or track width multiplied by the fullness you choose, then add side hems, seams, heading construction, pattern matching, and the required vertical hem allowances. The product of rod width and fullness is not the final cut size by itself.
Should I wash fabric before sewing curtains?
Only if the fabric's care instructions permit it and you expect to launder the finished curtains that way. Some fabrics or linings need different preparation; do not prewash by habit.
Should I line homemade curtains?
Lining is optional and depends on the room's light, privacy, appearance, and fabric. If you add it, plan its finished width and length as a separate layer and confirm care compatibility.
Can a beginner make curtains?
A simple straight panel with a basic heading is a manageable sewing project if you can measure, cut square, press, and sew straight seams. Pattern matching, heavy lining, and pleated construction add difficulty.
Editorial guidance reviewed November 14, 2026. Allowances and examples are planning aids, not universal product specifications. Follow the instructions for your actual fabric, lining, sewing equipment, and hardware.