Curtain Rods

Compare curtain rods by mounting surface, usable span and how the curtain attaches. The grid displays eight fabric panels to illustrate different headings. Curtain rods and mounting hardware are currently unavailable in this collection. Displayed styles are currently unavailable to order.

White sheer rod pocket curtain pair in a bright nursery
Skip to results list

Filters

8 items
Column grid

Active filters:

Column grid

Filter

Active filters:

Choose a rod for the opening and the fabric

Decide whether the rod will sit inside the opening or on brackets outside it. Check what the mounting surface can support, then use the hardware manufacturer’s weight rating at the span you need.

Compare three curtain rod types

  • An adjustable curtain rod lets you set a length within a specified range. Check the usable span between supports and the location of the telescoping joint before choosing it.
  • A spring tension rod presses against two opposing surfaces. Measure the inside width where the ends will sit, and confirm that the surfaces and curtain weight suit that rod. A light café curtain is one common use.
  • A double curtain rod holds a front and back layer, such as a blackout panel and a sheer. Check how far both rods project so the layers can open and close without catching on each other or on the trim.

Measure the span, projection and diameter

Mark the planned bracket positions and leave room for the finials. Check where a center support may interrupt curtain travel. Compare the rod diameter with the panel’s pocket, grommet or ring opening, including clearance at any joint.